How to Replace the Pull Cord on a Lawn Mower? 8 Easy Steps

Many advantages come with gas lawnmowers: ease of use, and the lack of a long power cord to worry about damage. However, using a pull cord to start it and the problems that go along with it are something that many people find annoying.

Knowing how to replace the pull cord of your lawnmower before or if it breaks is important since there are few things more frustrating than trying to start your lawnmower only to discover that it is broken.

You need to know now how to replace the pull cord on a lawn mower, so you can deal with the situation in the best way possible. Follow Lawn Advisors detailed guide on how to replace the pull cord on a lawn mower, then changing a pull cord will be an easy task for you.

Finally, you’ll find a few tips to keep in mind when replacing the pull cord in your lawn mower.

Materials and Tools Needed

Materials and Tools Needed to Replace the Pull Cord on a Lawn Mower

If you’re wondering how to replace the pull cord on a lawn mower, you should first keep these tools and materials in hand to help you in this process:

  • 4-in-1 Screwdriver
  • Leather Gloves
  • Needle-Nose Pliers
  • Nut Driver
  • New Pull Rope
  • Scissors/ Utility Knife

How to Replace the Pull Cord on a Lawn Mower?

We have provided an easy-to-follow guide to assist you because changing or repairing anything in a motor or mechanically advanced machine can be very nerve-wracking.

1. Ensure Your Mower Won’t Start

To make sure the mower won’t suddenly turn on by itself, you must remove the spark plug wires before removing any covers or putting your fingers close to mechanical parts.

Always SAFETY first!

2. Remove any Covers and the Starter Housing

You can remove any covers from the starter housing and then the main unit after you are absolutely certain that your mower is secure.

Several screws or bolts should be holding it in place; be sure not to lose them. Remove the rewind pulley from your starter housing if it is there.

3. Remove the Old Pull Cord

The old pull cord ought to be visible after the starter housing or rewinding pulley is removed. Unwind the rest of the cable from the system if the cable has broken.

If the line is unbroken, pull it until the pulley is wrapped up and then take it out, making sure to keep it in place and in line with the holes.

4. Insert the New Pull Cord

After removing the old cable, you can use a screwdriver to maintain the alignment of the holes as you measure and cut the new line.

If it isn’t, wind the pulley halfway and line up the feed holes. Once everything is in place, you may attach the new cord similarly to how you did with the old one.

5. Attach the Cord Handle

The handle can then be attached to the cord once it has been reattached and placed in its proper place.

The process will be made more difficult if you yet attach the handle in its normal place.

6. Reattach the Rewinding Unit or Housing

You can now reattach everything you took off earlier. Reposition any removable rewinding unit if you have one.

If you recently detached the starter housing, you can reattach it to make sure the screws or colts are secure. Additionally, make sure the handle and cord fit through the feed holes.

7. Attach the Cord Handle to the Push/ Steering Handle

Once everything is back in place, you may reattach the pull cord handle to its normal place on the back of your lawnmower.

For the best chance of starting your lawnmower, it would be preferable if you also reinserted the spark plug cables.

8. Test the New Pull Cord

Now that the new pull cord is installed and working, that is what matters most. Try to start your lawnmower; this is the easy way to use.

You should refer to your user manual or a qualified mechanic if there are any problems.

And here’s how to replace the pull cord on a lawn mower properly.

Important Tips on How to Replace the Pull Cord on a Lawn Mower

Here are a few tips you need to follow when replacing the pull cord on a lawn mower:

– To avoid losing small parts that need to be removed, keep a small box or container on hand at all times.

– The problem can be a damaged spring. The pulley may then need to be taken out of the assembly in that case.

– Before doing any maintenance on your mower, always remove the spark plug.

– Test the assembly by pulling out the cord after detaching it from the lawnmower to determine if it retracts back properly upon recoiling.

– Before you reinstall the pull cord assembly on the mower after repairing each part, test it.

– Although most pulleys don’t need to be removed, it may be necessary depending on how well your lawnmower is made. Installing a replacement spring that comes with the starter pulley is recommended.

How to Replace the Pull Cord on a Lawn Mower FAQ

To Wrap Up

You know now how to replace the pull cord on a lawn mower easily with this step-by-step guide so you can avoid lawn mower mishaps.

Don’t forget to prepare the tools and materials needed for this task before you start and check the user manual for more information about this process.

Still have any questions about how to replace the pull cord on a lawn mower? Leave them in Lawn Advisors comments box below and we’ll answer you.

Leave a Comment